Napoleon GI3016-N Installation And Operation Instructions Manual page 8

8
FLUSH GLASS FRONT KIT, GI-FF
Attach the lower glass bracket.
Seat the glass inside the bracket
and using two screws attach the
upper glass bracket, as shown.
FLASHING SURROUND KITS, GI-900 / GI-909
Assemble the flashing and mount to the inside of the outer
shell using 4 securing screws (supplied with the louvre
kit).
FIGURE 12b
SECURING SCREW
LOCATIONS
LOWER GLASS BRACKET
LOGO PLACEMENT
FIGURE 13
3
1 / "
8
LOGO
1
1 / "
8
Remove the backing of the logo supplied and place on the
glass viewing area, as indicated.
W415-0171 / E / 01.10.05
FIGURE 12a
FIGURE 14
Insert the back edge of the upper louvre into the upper
louvre clips.
Secure the lower louvre assembly to the insert, using the 4
screws supplied.
FLUSH LOUVRE KIT, GI-1L
UPPER
LOUVRE
LOUVRE
CLIP
UPPER LOUVRES
LOWER LOUVRES
SIDE VIEW