Entering/Deleting Names For Speed Dialing Numbers (Optipoint 600 Office Only) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
11 System speed dial
2 Speed dial name
+=Next
US:Save
UK:Confirm
* =Change
US:F3=Clear
UK:F3=Delete
US:Save
UK:Confirm
Entering/Deleting Names for
Speed Dialing Numbers
(optiPoint 600 office Only)
You can assign a name to each defined speed dialing
number. This name is then displayed in certain situa-
tions; for example, when the speed dialing number is
dialed, or in the case of an incoming call, when a caller
is stored as a system speed dialing number with a
name.
Prerequisite: System administration has been started
page 10.
Confirm.
Select and confirm.
or
eef
Enter the code.
Select memory location (000 - 299 or 000 - 999):
u v
or Press these keys.
or
Confirm.
or
r o
Enter the memory location directly and
Confirm your entry.
q
Enter the code.
or
Select and confirm.
Enter the name (up to 16 digits long).
A B C
Entering characters see
or To delete the name:
Select and confirm.
Confirm your entry.
Setting Up System Speed-Dialing
page 7 and page 8.
15