SE Series DVR Manual Table of Contents General Safety Precautions About This Manual Front Panel Layout Rear Panel Layout Main Screen Layout Mouse Control Operation using Front Panel Buttons/IR Remote Control Settings and Configurations 1-Camera Settings 2-Record Settings 3-Alarm Detection Settings...
SE Series DVR Manual Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK. DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user that insulated dangerous Voltage is contained within the product’s enclosure.
SE Series DVR Manual About this Manual Before installing this embedded DVR, be sure to thoroughly review and follow the instructions in this User Manual. Pay particular attention to the parts that are marked NOTICE. Also, when connecting with external devices, first turn the power OFF and follow the instruction manual for appropriate installation.
Page 6
SE Series DVR Manual FCC Statement: WARNING This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation."...
SE Series DVR Manual FRONT PANEL Record Reverse Playback/ Channel 1 Channel 3 Key Lock Change Rewind Auto Sequence Setup Menu Full Screen Full Screen Function Speed Mode Menu Playback Exit Move Up Menu/ Stop Playback Channel 4 File Channel 2...
SE Series DVR Manual REAR PANEL Up to 16 BNC Camera Input Connectors RS-232 Composite Audio Out (Serial) Monitor/TV Jack Connector BNC Connector Alarm In/ Alarm Out/ Power RJ-45 12V DC/5A RS-485 PS2 Mouse On/Off Audio In LAN/Internet VGA Out...
SE Series DVR Manual Main Screen Layout Live screen Recording icon Event (Motion / Alarm) Overwrite Video loss Motion Keypad lock *111111 is the default password Alarm...
SE Series DVR Manual Mouse Control ○ Screen display 1. With the mouse pointer on the desired camera in a multi-camera screen, double-click the left mouse button to full screen that particular camera 2. Double-click the left button on a full screen camera to return to multi-camera screen ○...
SE Series DVR Manual Operation With Front Panel Buttons: : Press the MENU button to enter menu setup or to exit MENU BUTTON : Press the ESC button to exit menu ESC BUTTON : Press the Enter button to confirm set or change a value...
SE Series DVR Manual 1-Camera Settings Select Camera Set from the Main Menu. Select the appropriate Channel (camera) and adjust the properties to provide the best video picture. Main MENU – Camera Set – Title The camera title setup function allows up to 5 characters to be entered to identify each video channel.
SE Series DVR Manual 2-Record Settings Main Menu – Record Set Record Set – *Schedule Record Frame rate Record Set – *Motion Record Frame rate Record Set – *Alarm Record Frame rate *Each channel has its own frame rate adjustment for each recording mode.
SE Series DVR Manual Record Set – Schedule Record Within a 24 hour period, the user can adjust each channel’s frame rate by record mode such as schedule, motion detection, and alarm record. Press the button to select different record modes or click the left mouse button.
SE Series DVR Manual 5-Screen Settings Border – Toggles the white border between camera displays on and off (see picture). Video Adjustment – Adjust the video display screen position movement Using the arrow keys on the front of DVR, adjust the overall screen image (up, down or sideways) as required.
SE Series DVR Manual 6-Audio Settings Audio Record – turn on or off as required with left mouse click or Enter button Mute – must be off to record or playback audio Input Volume – adjust slide switch with mouse or Enter button to adjust volume of audio being recorded Output Volume –...
SE Series DVR Manual 8-Time Setup (Main Menu – System Setup – Time Setup) Time Zone – Select time zone by left clicking on the displayed time zone until the correct one is displayed. Time Setup – Select Year/Month/Day and Hour/Min/Sec. by left-clicking with the mouse on each number displayed and then clicking the up/down arrows that appear under each digit, until the correct digits are selected.
SE Series DVR Manual 10-Network Settings (Main Menu – System Setup – Network Settings) Enable: Set to “Yes” to enable LAN or Internet access Local IP: click to select IP Type: Static (IP is manually assigned) Select Static if you have a Static IP Address...
(Main Menu – System Setup – Network Settings – DNS/DDNS Setup) Using the DynDNS service (www.dyndns.com), the SE Series DVR can be connected over the internet using a dynamic IP address. Start by creating an account with DynDNS by visiting www.dyndns.com...
Page 21
SE Series DVR Manual 2) Fill in all the personal information, password and email information. Go to your email account to receive your new account info. Return to the DynDNS website; click Account and login. cv1000 123456 3) Type your supplied Username and Password Logged In page 4) Click the “My Services”...
Page 22
SE Series DVR Manual 5) Click “Add Host Service” 6) Select “Add Dynamic DNS Host”...
Page 23
SE Series DVR Manual 7) Enter a hostname of your choice and click “Add Host”. df6020 Add Host For Example: We’ve created df6020 as a new host name. After a new host name is added, the DynDNS page will show...
SE Series DVR Manual 8) When the Host Name, username and password have been setup on the DDNS server, enter this information into the DNS/DDNS Setup screen: Enable: DNS Server: [Obtain from your ISP] DDNS Server: DynDNS. HOST Name: Insert host name...
SE Series DVR Manual 13-PTZ Camera Setup (Main Menu – System Setup – Pan/Tilt Device) From the Pan/Tilt Device setup screen, the channel, ID and Model of PTZ can be setup. PTZ cameras can be controlled using a combination of the front buttons and the mouse:...
SE Series DVR Manual 14-Video Search and Playback From the Main Menu, select Search. The Search function is used to search, find and play recordings by Time or Event. Select Time List, Event List or Time Search and follow the corresponding instructions below.
Page 27
SE Series DVR Manual Time Search: Selecting Time Search allows the Start and End times of a recording to be defined by date and time, and the resulting recordings played back. Follow the instructions below to perform a Time Search: Press ENTER/Click to select date and time.
SE Series DVR Manual 15-Video Backup Video can be backed up to a USB thumb drive or via the Internet/LAN using the supplied client software. The instructions below describe the process of backing video up to a USB thumb drive. In general, from any of the playback options, pressing the backup button on the front of the DVR will initiate the backup process.
Page 29
SE Series DVR Manual 3) After the “Reading USB Disk” message disappears, the backup information will be displayed on screen and the user now can press the Backup button to start the file backup process. When the backup is complete, press the menu button to exit the USB backup screen and return to live video mode.
SE Series DVR Manual 16-Remote Client Software The Net Viewer (Client) Software can be used to connect to the SE DVR remotely. It is a powerful tool and easy-to-use tool that can be used to modify setup and configuration settings, view live vide and playback and download video recordings.
Page 31
SE Series DVR Manual Viewer configuration: Right-click with the mouse to bring up the main NetViewer menu (shown above) Player-- Switch to backup file play mode Net View-- Switch to DVR network viewer Disconnect-- Network log out and connect canceled...
Page 32
SE Series DVR Manual File Player (Remote): Click here to open the desired video file Player buttons Open \ Fast Backward \ Play Reverse \ Previous Frame \ Pause \ Next Frame \ Play \Fast Forward \ Still Capture...
Page 33
SE Series DVR Manual Player Configuration: Right-click with the mouse to bring up the main NetViewer menu (shown above) Player--Switch to backup file play mode Netviewer-- Switch to DVR network viewer Open File-- Open the backup file which saved in any path Export-- Backup file to AVI file format (Video + Audio).
Page 34
SE Series DVR Manual Options Always on top: Player always on top even other data folders opened Show time: Show the PC time when user started recording backup file On Screen display date/time (Show time) format: Please select the date format desired:...
Page 35
SE Series DVR Manual VVF file export to AVI Click audio on if the image includes audio. Browse the file source Browse a path for file output File preview Select a compression codec Percentage of the export AVI progress Users please wait until file export completed.
SE Series DVR Manual Specifications 4, 8 or 16 CH DVR Model Input 4, 8 or 16 CH Inputs 1.0Vp-p, 75ohm unbalanced (BNC Type) Output VGA and composite (BNC type) Horizontal Resolution 640x480 (NTSC) S/N Ratio Better than 40dB Color 6.7 Million...
Page 37
SE Series DVR Manual Network Function Ethernet 10 /100 Base-T Network Connection TCP/IP, PPPoE, DHCP, DDNS Client Application Display/playback/DVR control Power Supply DC 12V / 5A Weight N.W./G.W. 3.06kg/3.68kg Dimension 426(W) x 328.5(D) x 65(H) mm Operating Temperature 41 ºF~104 ºF (5 ºC~+40 ºC)