Removing The Main Parts - Sharp LC-20VM2E Service Manual

LC-20VM2E

5. REMOVING THE MAIN PARTS

1. Remove the four main PWB fixing screws.
2. Remove the three inverter PWB fixing screws.
3. Remove the four RGB terminal PWB fixing screws.
4. Remove the one terminal PWB fixing screw and 1 earth
fixing screw to remove the reinforcing plate.
5. Remove the two LCD unit fixing screws.
6. Remove the three operation PWB fixing screws.
LCD Display Unit
3
RGB Terminal PWB
1
(Main PWB)
5
6
Operate PWB
2
Inverter PWB
Terminal PWB Ass'y
5
÷
Cabinet A
6
LC-121M2E
LC-150M2E
4
Reinforcing Plate