Procurve 2610-24-Pwr Configurations - HP ProCurve 2520 Planning And Implementation Manual

Planning and Implementation for the 2610-PWR Switches
Planning Your PoE Configuration

ProCurve 2610-24-PWR Configurations

The tables in the example configurations contain entries that show the PoE
power available when the 2610-24-PWR is used alone. When used with the 600
RPS/EPS or 610 EPS unit, PoE power is available to the PoE ports should the
internal PoE power supply fail. Table entries show the PoE power available
when the 600 RPS/EPS or 610 EPS alone provides PoE power.
600 RPS/EPS
ProCurve Switch
2610-24-PWR
Figure 5-2. Example of an 600 RPS/EPS Powering One 2610-24-PWR Switch
A single 2610-24-PWR switch with a dedicated 600 RPS/EPS unit has fully
redundant PoE power for all 24 ports at 15.4 W per port.
5-4
Source of Watts
Power Available
Internal PoE 406
Power
Supply
Internal plus 406 + 408
External PoE
1 - 24
Power
Supply
External PoE 408
Power
Supply
(Failed
Internal PoE
Power
Supply)
# of Ports Powered and
Average watts/Port
24 @ average 15.4 W each
24 @ average 15.4 W each
24 @ average 15.4 W each
Redundant # of Ports
Powered and Average watts/
Port
None
24 @ average 15.4 W each
None