Before Driving - Honda Insight 2005 Reference Owner's Manual

Main Menu Table of Contents
To Dehumidify the Interior
On vehicles with climate control
Air conditioning, as it cools, removes
moisture from the air. When used in
combination with the heater, it
makes the interior warm and dry.
1. Turn the fan on.
Turn on the air conditioning.
2.
3. Select and Fresh Air mode.
4. Adjust the temperature control
dial to your preference.
This setting is suitable for all driving
conditions whenever the outside
temperature is above 32°F (0°C).
To Defog and Defrost
To remove fog from the inside of the
windows:
1. Set the fan to the desired speed.
2. Select , the system
automatically switches to Fresh
Air mode. On vehicles with
climate control, the system also
turns on the A/C. The A/C
indicator will not come on, if it was
off to start with.
3. Adjust the temperature control
dial so the airflow feels warm.
4. Select to help clear the
rear window.
When mode is selected, the
auto idle stop function will not
activate.
When you switch to another mode
from , the A/C stays on.
Press the ECON button to turn it off.
When you turn off
pressing the button again, the
system returns to its former settings.
Vents, Heating, and A/C
To Remove Exterior Frost or Ice
From the Windows
1. Select
automatically switches to Fresh
Air mode. On vehicles with
climate control, the system also
turns on the A/C. The A/C
indicator will not come on, if it was
off to start with.
2. Select
3. Set the fan and temperature
controls to the maximum level.
To clear the windows faster, you can
by close the dashboard corner vents by
rotating the wheel next to them. This
will send more warm air to the
windshield defroster vents. Once the
windshield is clear, select the Fresh
Air mode to avoid fogging the
windows.
For your safety, make sure you have
a clear view through all the windows

before driving.

. The system
.
77