Econ Button - Honda Insight 2005 Reference Owner's Manual

Main Menu Table of Contents
On vehicles with automatic
transmission (CVT), see page
Automatic Climate Control and
Manual Operations information.
Fan Control
You can manually select the fan
speed by pressing the fan control
button ( / or
fan speed is shown by bars in the
display.
Temperature Control Dial
Turning this dial clockwise increases
the temperature of the airflow.

ECON Button

If the A/C is on when this button is
pressed, the auto idle stop works
only if the outside temperature is
above 41°F (5°C).
If the cooling provided in ECON
78 for mode is not adequate, press the Auto
button (see page
Recirculation Button
When the recirculation indicator is
on, air from the vehicle's interior is
sent throughout the system again.
). The When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
The system should be left in Fresh
Air mode under almost all conditions.
Keeping the system in Recirculation
78 ).
mode, can cause the windows to fog
up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
Rear Window Defogger Button
This button turns the rear window
defogger off and on (see page
Mode Control Button
Press the mode control button to
select the vents the air flows from.
Some air will flow from the
dashboard corner vents in all modes.
and corner vents in the dashboard.
Vents, Heating, and A/C
Air flows from the center
CONTINUED
).
58
75