Table of Contents
Advertisement
1-12
5.3.4
To Install the Remote Controlhead:
1.
Position the Remote Mount Bracket (Item2 in Figure 1-8 Remote Front and Back Housings) in
the desired location and mark the positions of the mounting holes.
2.
Centrepunch the marked spots and drill 4mm holes at each spot.
3.
Fix the Remote Mount Bracket in position using the supplied screws.
4.
Route the Remote Cable (Table 1-3) as required, feeding it through the bracket
(a 20mm hole is required for the cable plug).
5.
Push the cable plug into the Remote Front and Back Housing until it snaps into place.
6.
Snap the assembly into the bracket.
7.
Adjust the assembly as required then fix it in position with the wing screws supplied.
Item
1
2
3
4
5
6
7
8
* Cable Kits to be ordered separately.
NOTE
Table 1-3 Associated Components
Description
Wingscrews
Remote Bracket
Remote Back Housing
(GM380/GM1280)
Remote Back Housing
(GM340/GM360/GM640/GM660)
Remote PCB (2 off per kit)
Flex (2 off per kit)
Cable Kit 3M
Cable Kit 5M
Cable Kit 7M
Remote (Transceiver) Front Housing
Dismantling Tool
Specifications are subject to change without notice.
Contact your Motorola dealer for the latest specifications.
INSTALLATION
Part Number
0305760W02
0764275B01
1564268B01
1564269B01
GLN7362
8486127B01
RKN4077*
RKN4078*
RKN4079*
1564270B01
6686119B01
Hide quick links:
Advertisement
Table of Contents
