Toyota TACOMA 2010 Quick Reference Manual page 452

Toyota tacoma 2010
Hide thumbs Also See for TACOMA 2010:
Table of Contents

Advertisement

The tire pressure warning system may be disabled in the following condi-
tions:
(When the condition becomes normal, the system will work properly.)
If electronic devices or facilities using similar radio wave frequencies
are nearby.
If a radio set at similar frequencies is in use in the vehicle.
If a window tint that affects the radio wave signals is installed.
If there is a lot of snow or ice on the vehicle, in particular around the
wheels or wheel housings.
If non-genuine Toyota wheels are used. (Even if you use Toyota
wheels, the tire pressure warning system may not work properly with
some types of tires.)
If tire chains are used.
If the tire pressure warning light comes on after blinking for 1
minute frequently
If the tire pressure warning light comes on after blinking for 1 minute fre-
quently when the engine switch is turned to the ON position, have it
checked by your Toyota dealer.
After changing the engine oil (U.S.A. only)
Make sure to reset the oil maintenance data. (→P. 367)
Customization that can be configured at Toyota dealer
The vehicle speed linked seat belt reminder buzzer can be disabled.
(Customizable features →P. 502)
5-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
5
437

Advertisement

Table of Contents
loading

Table of Contents