Panel Replacement; Board Replacement; Ae Board Replacement; Be Board Replacement - Sony KDL-26S2000E Service Manual

COLOR_TEMP=1
R_DRV B_DRV
26" TBD TBD
32" 262 240
40" 253 235
46" TBD TBD
22. Send ECS COLOR_SAVE command.
23. Set up COLOR_TEMP=2.
24. Write the correct values for R_DRV, B_DRV, R_BKG and B_BKG
from the table below.
R_DRV B_DRV
26" TBD
32" 262
40" 251
46" TBD
25. Send ECS COLOR_SAVE command.
26. Set up COLOR_TEMP=3.
27. Write the correct values for R_DRV, B_DRV, R_BKG and B_BKG
from the table below.
R_DRV B_DRV
26" TBD
32" 265
40" 260
TBD
46"
28. Send ECS COLOR_SAVE command.
29. Switch the TV set OFF and then ON again to retain adjustment
values.
R_BKG B_BKG
TBD TBD
504 504
515 507
TBD TBD
COLOR_TEMP=2
R_BKG B_BKG
TBD TBD TBD
218 507 509
219 517 505
TBD TBD TBD
COLOR_TEMP=3
R_BKG B_BKG
TBD TBD TBD
189 509 516
198 511 500
TBD TBD TBD

3-5. Panel Replacement

When replacing the panel please reset the gamma and white balance
before performing W/B (See page 27) for new panel.

3-6. Board Replacement

3-6-1. AE Board Replacement

When replacing the 'AE' board please readjust the AD (See page 25)
and readjust the W/B (See page 27).

3-6-2. BE Board Replacement

When replacing the 'BE' board please readjust the AD (See page 25)
and readjust the W/B (See page 27).
Note :
In the event of a 'BE' board being re-used in service please
ensure that the Serial number is cleared in the NVM.
- 29 -
WAX2
RM-ED005