Pioneer VSX-D409 Service Manual page 59

QQ
3 7 63 1515 0
4 THE FOLLOWING FOUR SETS OF BUTTONS
ARE DEDICATED TV CONTROL. THEY ARE
ONLY USED FOR CONTROLLING YOUR TV.
FUNC button
Use select the TV function.
TV POWER button
Use to turn on the power of the TV.
TV CHANNEL +/– buttons
Use to change channels on your TV.
TV VOLUME +/– buttons
Use to adjust the volume on your TV.
5 MENU button
Use to access different menus associated with your DVD
player.
6 SOURCE button
Use to turn on/off other components coneccted to the
receiver.
7 THE FOLLOWING BUTTONS ARE BOTH
CONTROLS FOR OTHER COMPONENTS (LIKE
A DVD PLAYER) AND DEDICATED TUNER
CONTROLS. THE TUNER CONTROLS ARE
EXPLAINED HERE. YOU CAN USE THEM
AFTER YOU HAVE PUSHED THE TUNER MULTI
CONTROL BUTTON.
CLASS button
TE
L 13942296513
Use to switch between the three banks (classes) of station
memories.
MPX MODE button
Use to switch between auto stereo and mono reception of
FM broadcasts. If the signal is weak then switching to
MONO will improve the sound quality. Also, this is the
pause button for CDs, tapes, DVDs, etc.
BAND button
Use to switch between the AM and FM band when in
TUNER mode.
D. ACCESS button
Use to directly access a radio station by pressing the
number of the station you want.
8 LOUDNESS button
Use to switch on the loudness. This feature is useful for
getting good bass and treble sounds listening at low
volumes.
9 FUNCTION button
Use select the playback or recording source. This button
lets you cycle through the different functions of the receiver
in the following order: CD, tuner, CDR/TAPE, VCDR/DVR,
DVD/LD, DVD 5.1 CH., and TV/SAT.
etc.
0 RECEIVER
This switches between STANDBY mode and power ON for
this receiver.
www
- FL DIMMER button
Use this button to make the fluorescent display (FL) dimmer
or brighter. There are three brightness settings as well as an
.
off setting.
http://www.xiaoyu163.com
(POWER) button
x ao
y
i
http://www.xiaoyu163.com
8
= LED DISPLAY
This display flashes when a command is sent from the
remote control to the receiver. It also flashes at other times,
for example when teaching the receiver preset codes, with
specific meanings.
~ EFFECT +/– buttons
Use to add or subtract the amount of effect in different DSP
sound modes or advanced listening modes.
! 2 3 5∞ ( FQ +/–) & ENTER buttons
Use these arrow buttons when setting up your surround
sound system. These buttons are also used to control DVD
menus/options and for deck 1 of a double cassette deck
player. The FQ +/– buttons can be used to find radio
frequencies.
@ TOP MENU button
In DVD mode this button brings you to the top or most
fundamental menu.
# CHANNEL +/– buttons
Use to select the stations of memorized radio frequencies.
Also use to skip tracks backward or forward on CDs, DVDs,
etc.
$ MUTING button
Use to mute the sound or restore the sound if it has been
muted.
% MASTER VOLUME +/– buttons
Use to set the overall listening volume.
^ REMOTE SETUP button
Q Q
3 6 7 1 3
Use this button when setting up the remote control to control
other components.
u163
.
VSX-D409, VSX-D309
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9
59