4-2 Setting the Location for Starting Output
Setting the Output-start Location
Procedure
Printing area
Output-start
location
Scan-direction
start location
FUNCTION
BASE POINT
W1100mm
B
This indicates that the
output-start location has
been set.
Feed-direction
Description
You can set the output-start location at any location you prefer. Note, however, that this setting must be made for each in-
dividual page. When the printing of one page finishes, the output-start location returns to its default value. When the start
location has been set,
the location.
This feature is also available when you're printing or cutting various test patterns, and can help you use media with less waste.
Note, however, that the left and right positions are not restored to their defaults for test patterns.
If you're using the separately available media take-up unit, never use
force, resulting in an error or malfunction.
Feed-direction
start location
Press
.
Press
to save.
Scan-direction
lights up and screen displays the character "B" together with the output-possible width at
U s e
move the cutting carriage.
Align the center of the blade with the new
output-start location.
. Doing so may pull the media with undue
t o
4
69