1-2 Part Names and Functions
Printer Unit
Loading lever
You operate this when you
load media.
Maintenance cover
You remove this when
you perform cleaning the
print head.
Status LED
This flashes yellow while data is being
received from the network.
Link LED
This lights up green when the con-
nection to the network is correct.
Connector
This is employed when you're
us ing the media take-up system
available separately.
Front cover
Side cover
Keep this closed except
You remove this when you
when necessary, during
perform maintenance.
when loading media.
Grit patterns
These indicate the locations of the grit rollers. You
use them as guides for positioning the left and right
sides when loading media.
Operation panel
You use this to perform vari-
ous operations.
P. 27, "Operation Panel"
Drain bottle
This collects drained ink
and other such fluids. Dis-
card any collected fluid
before it overflows.
Main power switch
Power-cord connector
This supplies power to the printer.
Ethernet connector
This is used to connect the print-
er to a network.
Cartridge slots
There are where ink car-
tridges are installed.
1
25