Advertisement
The image tone (TV or Cinema) and the aspect ratio (4:3 or 16:9) are selectable in Video menu mode.
1
The main menu appears on the screen.
2
5 5 5 5
The "Setting 1" submenu appears on the screen.
Setting 1
Position
ENTER
Tone
TV
Cinema
Aspect change
4:3
16:9
Decoder
ENTER
Setting 2
ENTER
Decoder is only displayed when there is a signal for the Video IN terminal.
3
4
The image tone projected on the screen can be changed.
2 or 3
Tone
TV*
: Suitable for projecting the video programs.
Cinema : Suitable for projecting the cinema programs.
Sets the vertical-to-horizontal ratio (4:3 or 16:9) of the video image projected.
"4:3*" : The aspect ratio of the projected image becomes 4:3. Set it to 4:3 for video
2 or 3
Aspect change
of NTSC, NTSC4.43, PAL, SECAM.
"16:9" : The aspect ratio of projected image becomes 16:9. Set it to 16:9 for Hi-
Vision devices (W-VHS VCR, etc.).
5
∞ ∞ ∞ ∞
3 3 3 3
5 5 5 5
∞ ∞ ∞ ∞
2 2 2 2
3 3 3 3
The picture image projected can be selectable with the
Resize function which is available only in PC menu mode.
You can choose the video image size projected from the
following: (Factory setting is "Aspect".)
The image is displayed at the input resolution. The
picture image projected is not enlarged even if its
number of pixels (resolution) is smaller than that of
the projector's D-ILA element (1365 pixels × 1024
pixels).
×
The picture image projected is virtually enlarged to
the full size (1365 pixels × 1024 pixels). The
horizontal and vertical enlargement ratio will differ
depending on the original image and the image will
be deformed.
×
While maintaining the original aspect ratio, the video
image projected is virtually enlarged until either the
horizontal or vertical side reaches the full size (1365
pixels × 1024 pixels).
×
×
1
The main menu appears on the screen.
2
5 5 5 5
∞ ∞ ∞ ∞
3 3 3 3
The "Setting" submenu appears on the screen.
Setting
Tracking
123
Phase
12
Position
ENTER
Resize
1:1
Panel
Aspect
Clamp
ST
FP
BP
3
5 5 5 5
∞ ∞ ∞ ∞
4
2 2 2 2
3 3 3 3
5
When the image is too dark or bright, or when the image is
unstable, switching the position may improve the image
quality. Normally, set to "BP".
1
The main menu appears on the screen.
2
5 5 5 5
∞ ∞ ∞ ∞
3 3 3 3
The "Setting" submenu appears on the screen.
3
5 5 5 5
∞ ∞ ∞ ∞
4
2 2 2 2
3 3 3 3
5
ST: Sync Tip
FP: Front Porch
BP: Back Porch
Advertisement
