Oil Filter Removal And Installation; Engine Unit Removal - Yamaha WaveRunner FX140 Service Manual

Hide thumbs Also See for WaveRunner FX140:
Table of Contents

Advertisement

POWR
1
2
ENGINE UNIT
9. Install:
• Air filter element
• Air filter case cover
Air filter case cover screw:
2.5 N • m (0.25 kgf • m, 1.8 ft • lb)
LOCTITE

Oil filter removal and installation

1. Remove:
• Oil filter 1
Oil filter wrench 2:
YU-38411/90890-01426
Oil filter:
17 N • m (1.7 kgf • m, 12 ft • lb)
NOTE:
Install the oil filter with the same special tool
that was used for removal.

Engine unit removal

1. Remove:
• Engine unit
Removal steps:
CAUTION:
Lift the engine unit carefully trying not to
hit it on the deck or letting it fall hard on
the hull.
• Suspend the engine unit using all three
engine hangers, and then separate the
unit from the engine mount.
• Remove the hoist cable from the front
engine hanger and use the two rear
engine hangers to suspend the engine
unit.
• Lift the engine unit out vertically while
turning it clockwise.
5-6
®
572
E

Advertisement

Table of Contents
loading

Table of Contents