e. Attach the power supply line cord to a power supply.
12. Verify the behavior of the access point LED light pipe. For more information, see
"
LED Indicator
13. Place the ceiling tile back in its frame and verify it is secure.
14. The access point is ready to configure. For information on basic access point device
configuration, see "
2.7 LED Indicator
An AP-621 Series access point has a single LED activity indicator on the front of the access point.
The LED provides a status display indicating error conditions, transmission, and network activity for
the 5 GHz 802.11a/n (amber) radio or the 2.4 GHz 802.11b/g/n (green) radio.
" on page 15.
Using the Initial Setup Wizard
Hardware Installation
" on page 17.
15