Volume; Return +/Tv; Muting; Menu - JVC I'Art 1003-TN-II-IM User Manual

Button Functions
Volume +/–
Use these buttons to raise or lower the TV's volume level.

Return +/TV

The R +/Tv button has three functions:
ETURN
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
R +/T
ETURN
The channel currently active has been programmed as your Return+ channel. Now scan
R +/T
ETURN
• To cancel your Return+ channel, press and hold the R
message "RETURN CHANNEL CANCELLED!" will appear.
• Return+ works only with the C
Return+.

Muting

The M button instantly turns the volume down completely when you press it. To restore
UTING
the volume to its previous level, press M

Menu

The M button allows you to access JVC's onscreen menu system. Press M
ENU
the onscreen menu system.
• See individual topics like "Sound Adjust" for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus. When you
have selected a digital program on your television and you press the O
channel selection OSD appears.

Back

This button allows you to go back in the menu to change a selection or correct a mistake.
62
and hold for three seconds
V
through the channels using the C
V
You will return to your programmed channel.
+/– buttons. Pressing any number key will cancel
HANNEL
UTING
+/– buttons.
HANNEL
+ button for three seconds. The
ETURN
again.
to activate
ENU
button, the minor
K