Polaris ATP 330 4x4 2005 Owner's Manual page 106

MAINTENANCE AND LUBRICATION
Lights
Lower Headlight Lamp Replacement
1. Turn the back of the
headlight harness in a
counter-clockwise
direction to loosen (A).
2. Pull the harness assembly
out from the headlight
assembly.
3. Remove the headlamp and
replace with a new
headlamp.
4. Install the new headlamp
and harness assembly into the headlight assembly. Turn the
headlight harness clockwise (B) to secure.
Lower Headlight Adjustment
1. Loosen the nuts(C) that secure the lower headlamps. Adjust the
headlamps as needed.
2. Tighten the nuts on the headlamps after adjustment is made.
Taillight/Brakelight Lamp Replacement
If the taillight/brakelight does not work, the lamp may need to be
replaced.
1. Remove the two screws securing the lens assembly.
2. Pivot the assembly outward.
3. Turn the housing clockwise and remove the bulb.
4. Apply dielectric grease to the socket and install a new bulb.
5. Reinstall the taillight assembly.
A
B
C
103