Alfa Romeo Blue&me User Manual page 60

Problem
Display screen shows: PAIRING FAILED
Or the system says "Bluetooth pairing
timed out. Please try again later."
Display screen shows:
INCOMING CALL PRIVATE
NUMBER
Display screen shows: FUNCTION
ENABLED ONLY WHEN VEHICLE
STATIONARY
Or the system says:
"This function is only available
when the vehicle is stationary"
Probable Cause
After three minutes, each attempt to
enter the PIN number fails since
pairing timed out
❒ The caller is not recognized as a name
stored in the phonebook, and the
paired mobile phone does not have a
called ID feature
❒ The caller has blocked caller ID
to prevent the system from displaying
the caller's name and/or phone
number
Even occasional short viewings of the
car display may be hazardous if your
attention has been diverted away from
your driving tasks. Certain Blue&Me™
functions, which require the user to give
attention to the car display, are only
available when the car is stopped
Possible Solution
Retry the pairing procedure. During the PIN
entering step, verify that the PIN number
you are entering on the mobile phone is
the same number that is shown on the
instrument panel display
SETTING FUNCTIONS -
PAIRING YOUR MOBILE PHONE
Enter a contact in your mobile
phonebook for the incoming call,
and then download your phonebook/
contact again
In this case, nothing can be done and
the message will always appear
Stop your car and attempt to perform the
function again manually, or continue
driving and perform the function using the
voice recognition system
59