Changing The Gprs Code; Exit The Settings Menu - Alfa Romeo Blue&me User Manual

Changing the GPRS code

If your mobile phone carrier requires to
change the GPRS code, you can perform this
operation via the ADV. OPTIONS menu.
?
To change the GPRS code using man-
ual interaction, proceed as follows:
Go to the GPRS CODE menu and
˜
press SRC or .
The display will show GPRS:, and
a list of digits (1, 2, 3, 4, 5, 6, 7,
8, 9), DEFAULT, and DISABLE. To
select the new GPRS code, press N
and O until choosing the required op-
tion, then press SRC or
the default value, select DEFAULT.
To disable the connection code, select
DISABLE.
After setting the new GPRS code,
Blue&Me™ will display the mes-
sage GPRS CODE SET.
}
To set the GPRS code using voice in-
teraction, proceed as follows:
ô
Press , pronounce "Settings" and
then "Connection code".
Blue&Me™ will prompt "The cur-
rent GPRS connection code is value .
To change code say a number from 1
to 9 or say "Default". To disable the
connection code say "Disable". To
change the code, say a number from
1 to 9 or say "Default". To disable
the connection code say "Disable".
(In previous text, value is the GPRS
connection code set at that moment).
˜
. To store
After setting the new connection code,
Blue&Me™ will say "The Connec-
tion Code is set to value " (here value
corresponds to the new GPRS code
set).

EXIT THE SETTINGS MENU

At the end of any of the operations described
above, you can exit the settings menu as
described below.
?
To exit the SETTINGS menu using
manual interaction:
Select EXIT and then press SRC or
˜
.
}
Or, using voice interaction:
ô
Press and pronounce "Exit".
43