Table of Contents
Advertisement
Appendix B
It is very important you DO NOT TOUCH THE GLASS SURFACE OF THE NEW LAMP. Touching the glass sur-
face will deposit oils from your hand onto the lamp surface. When the lamp heats up to operating temperature,
the oil will cause a difference in temperature on the lamp surface. This will likely cause the lamp to break.
Replace the lamp with part number PK-CL200U only! The television is designed to work specifically with
this lamp. Using a different lamp, or a third-party manufacturer's lamp could cause a malfunction and/or
damage to the television.
Under operating conditions THE LAMP WILL GET EXTREMELY HOT AND WILL CAUSE SEVERE BURNS
IF TOUCHED.
Before attempting to replace the lamp, make sure the television has run through its cooling cycle (indi-
cated by the front panel 10 LED lights) and that the television is unplugged. If you feel any warmth com-
ing from the lamp DO NOT TOUCH IT. Wait until the lamp has fully cooled before attempting to replace it.
NEVER attempt to replace the lamp with the television plugged into a wall outlet. Attempting to replace
a lamp with the television plugged in could lead to a severe electrical shock.
Please read these instructions fully before attempting to replace the lamp. If you feel unsure about
replacing the lamp, call a service technician.
1) Turn the television off.
Warning: The cool-down cycle cools the lamp from its normal operating temperatures. This does not mean
the lamp will now be cool enough to handle safely. Wait at least one hour before proceeding.
60
Advertisement
Table of Contents
