Before Using For The First Time; Basic Connections; Connecting The Player To A Tv Or Amplifier/Receiver Using The Audio Video Cable; Connecting The Player To An Amplifier/Receiver Equipped With The Analog Discrete Inputs - JVC XL-MV757TN Instructions Manual

BEFORE USING FOR THE FIRST TIME

Basic connections

The Video CD player must be connected directly to a television set or,
an amplifier or receiver that is connected to a television or monitor.
Select a level, dry location free of dust and vibration, having a
temperature maintained between 5 and 35 C (41 and 95 F).
Connecting the player to a TV or ampli-
fier/receiver using the Audio Video cable
First make the audio and video connections before connecting the AC
power cord. Also, make sure that the equipment (television, amplifier
or receiver) to be connected with the player is turned off.
Firmly insert the yellow pin plug of the Audio Video cable in the yellow
VIDEO OUT jack on the rear panel of the player; the red pin plug in the
red AUDIO OUT FRONT (RIGHT) jack; and the white pin plug in the
white AUDIO OUT FRONT (LEFT) jack. (The RIGHT and LEFT output
jacks are for the right and left audio channels.)
Then firmly insert the pin plugs at the other end of the Audio Video cable
into the matching video and audio INPUT jacks.
If your television set has an S-video input, we recommend you to
connect it with S-VIDEO OUT of the player using the optional S-Video
cable, in addition to the (standard) video connection, to get a better
picture quality.
(Red) (White)
Audio Video cable (supplied)
AUDIO OUT
RIGHT LEFT
FRONT
AUDIO OUT
RIGHT LEFT
SURROUND
AUDIO OUT
VIDEO OUT
CENTER
S-VIDEO VIDEO OUT
SELECT
OUT
NTSC MULTI
PAL
Page 2
To input audio jack of
the television/amplifier/
receiver
Audio Video cable (supplied)
(Yellow) To input video jack of
the television/amplifier/receiver
AV COMPU LINK
To input S-Video jack of
the television/amplifier/receiver
S-Video cable (optional)
Connecting the player to an amplifier/
receiver equipped with the analog dis-
crete inputs
Connect the player's 5-channel outputs (AUDIO OUT FRONT-RIGHT/
LEFT, AUDIO OUT SURROUND-RIGHT/LEFT, and AUDIO OUT
CENTER) to the analog discrete inputs of an amplifier/receiver using
audio cables, while the VIDEO OUT to the television's video input
terminal using the yellow plugs of the supplied Audio Video cable. Be
sure to connect correctly between corresponding terminals.
AUDIO OUT
AUDIO OUT
SURROUND
VIDEO OUT
S-VIDEO
To input REAR
(Red)
jack of the
(White)
amplifier/receiver
Audio cable
(optional)

Video out select

Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL,
or MULTI mode according to your television system.
NTSC .................... for NTSC exclusive TV
PAL ....................... for PAL exclusive TV
MULTI ................... for Multisystem TV
AUDIO OUT
RIGHT
FRONT
AUDIO OUT
RIGHT
SURROUND
VIDEO OUT
S-VIDEO
OUT
Note
• Set the switch before turning the power on. If you change the switch
position while the power is on, the new setting does not become
effective until you turn the power to standby and then on.
To input FRONT
jack of the
amplifier/receiver
(Red) (White)
RIGHT LEFT
FRONT
RIGHT LEFT
AUDIO OUT
CENTER
AV COMPU LINK
VIDEO OUT
OUT SELECT
NTSC MULTI
PAL
Audio cable (optional)
To input CENTER jack of
the amplifier/receiver
LEFT
LEFT
AUDIO OUT
CENTER
AV COMPU LINK
VIDEO OUT
SELECT
NTSC MULTI
PAL