Entering System Setup
1.
Turn on or restart your system.
2.
Press <F2> immediately after you see the following message:
<F2> = System Setup
If your operating system begins to load before you press <F2>, allow the system to finish booting,
and then restart your system and try again.
Responding To Error Messages
If an error message is displayed while the system is booting, make a note of the message. For more
information, see
System Error
NOTE: After installing a memory upgrade, it is normal for your system to display a message the first
time you start your system.
Using The System Setup Navigation Keys
Keystroke
Action
Up arrow
Moves to the previous field.
Down arrow
Moves to the next field.
<Enter>
Allows you to type in a value in the selected field (if applicable) or follow the link in
the field.
Spacebar
Expands or collapses a drop-down menu, if applicable.
<Tab>
Moves to the next focus area.
<Esc>
Moves to the previous page till you view the main screen. Pressing <Esc> in the
main screen displays a message that prompts you to save any unsaved changes and
restarts the system.
<F1>
Displays the System Setup help file.
System Setup Options
System Setup Main Screen
NOTE: Press <Alt><F> to reset the BIOS to its default settings.
Menu Item
Description
System BIOS
This option is used to view and configure BIOS settings.
12
Messages.
NOTE: For the standard graphics browser only.
NOTE: For most of the options, any changes that you make are recorded but
do not take effect until you restart the system.