Internal consultation call/connecting
a call
You are in conversation with an external participant.
Press the
key and call one or all handsets. The
INT
external participant hears the hold music.
◆
Before the internal participant has answered,
press the end call key
participant who answers the call.
◆
After the internal participant has answered, you
can talk to him. Press the end call key
diverted, or press the display key
reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal par-
ticipant can listen in on this call and take part in the
conversation (conference).
Precondition: The
Listening in
vated.
Activating/deactivating listening in
¢
¢
¢
¢
MENU
Settings
OK
Listening in
OK (
Internal listening in (conference)
You want to listen in to an existing external call.
c
Press and hold the
key. You can listen in to the call.
All participants hear a signal tone.
To end: press the end call key
a signal tone.
If the first internal participant presses the end call key
a
, the handset that has "listened in" remains con-
nected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
¢
¢
¢
MENU
Alarm Clock
‰
OK (
= on)
When activated:
¢
Set the wake-up time
When the alarm clock rings, press any key to switch it
off for 24 hours. If the alarm clock is set, the wake-up
l
icon
will appear on the screen and the wake-up
time will be displayed instead of the date.
Setting the wake-up time
¢
¢
¢
MENU
Alarm Clock
OK
Enter the wake-up time in hours and minutes, then
press
.
OK
a
; the call is diverted to the
a
; the call is
"
; you are
function must be acti-
¢
¢
Base
OK
‰
= on)
a
. All participants hear
¢
OK
Activation
¢
OK
¢
OK
Wake-up time
12
Phone settings
¢
For details on how to set audio settings, see Menu
tree
page 21.
For details on how to set the system PIN on the base
station, see the Menu tree
Changing the display language
¢
¢
¢
MENU
Settings
Language
OK
The current language is indicated by
If you accidentally choose a language you do not
understand:
¢
MENU
4 2 1 (press the keys one after the other)
Select the correct language with
Resetting the handset
You can reset individual settings and changes that
you have made. Entries in the directory, the calls list
and the handset's registration to the base station will
be retained.
¢
¢
MENU
Settings
Reset Handset
Cancel the reset with
Restoring the base station to the
factory settings
When restoring factory settings:
◆
All handsets are de-registered
◆
Individual settings are reset
◆
All lists are deleted
◆
The system PIN is reset to the original code 0000
Only the date and time are retained.
Software reset
¢
¢
¢
MENU
Settings
Base Reset
Hardware reset
Disconnect the power cord from the base station.
Hold down the registration/paging key (
on the base station while reconnecting the power
cable to the base station. Release the key after
approximately 5 seconds.
Repeater mode
With a repeater you can increase the range of your
¢
base station. You will need to activate repeater mode
¢
(
page 22). Repeater mode and Eco mode or Eco
mode+ (
page 1) cancel each other out.
¢
page 22.
¢
¢
¢
¢
OK
Handset
select the language
‰
.
u
and press
¢
¢
¢
¢
OK
Handset
OK
a
.
¢
¢
¢
OK
Base
OK
OK
¢
¢
OK
OK
.
OK
OK
page 1)