Bagger Removal For Side Discharge - Exmark lazer z Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

3.3 BAGGER REMOVAL FOR SIDE DISCHARGE:

3.3.1 Shut off the deck drive, stop engine, wait for all moving parts to stop, and remove
3.3.2 Remove the discharge tube by releasing the latch at the blower. Slide the tube
3.3.3 Remove the Belt cover by loosening the knobs. For 60"and 66" units the
3.3.4 Pull the idler release handle and remove the belt from the upper groove of the
key. Engage parking brake.
off the blower outlet and remove the upper end from the hood.
outboard knob does not need to be removed completely to remove the belt cover.
POTENTIAL HAZARD
♦ The deck sheave will become very hot.
WHAT CAN HAPPEN
♦ Touching a hot deck sheave can cause
severe burns.
HOW TO AVOID THE HAZARD
♦ Allow the deck sheave to cool completely
before removing the belt.
deck sheave.
www.mymowerparts.com
FIGURE 2
CAUTION
8