Setting The Autopan Jumper - GE Interlogix KTD-125 User Manual

Setting the Autopan Jumper

2 S
ETTING THE
Note: Make the autopan jumper selection before you supply power to the unit.
1)
Determine whether or not your pan/tilt drive has an internal
reversing switch. (See Appendix A, Determining the Type of
Pan/Tilt Drive.)
2)
Locate the autopan jumper. For KTD-125 units see Figure 2; for
KTD-127 units see Figure 3.
Figure 2. KTD-125 autopan jumper location
Figure 3. KTD-127 autopan jumper location
6
KTD-125/127 PTZ Receivers User Manual
A J
UTOPAN UMPER
1040823A / June 2003