KTD-125/127 PTZ Receivers User Manual
5
I
NSTALLING THE
CAUTION:
Complete all instruction steps before supplying power to the unit.
5.1
M
OUNTING THE
Note: In most cases, it is easier to mount the unit with the main relay board removed.
1)
Remove the board from the housing as shown in Figure 26,
Figure 27 and Figure 28.
Figure 26. Removing the finger nuts
1040823A / June 2003
KTD-127W
U
NIT
Main relay board
Installing the KTD-127W
Finger nuts
23