Advertisement
Installation
2.
Insert the Input Card into the slot,
fitting into the guides inside the
slot, so that its panel touches the
bottom of the monitor.
You can install the Input Card(s) into
either left or right slot. When installing,
follow the procedure below.
• When installing two Input Cards:
Install either of Input Cards into the left
slot first.
• When installing only one Input Card:
You need to attach the supplied slot
cover to the blank slot.
Install either Input Card or the supplied
slot cover into the left slot first as
illustrated on the right.
3.
Secure the Input Card by using the
screws removed in Step 1 on the
previous page.
After installation
• Place the supplied labels on the rear panel and the
remote control of the monitor as illustrated on the right.
– On the rear panel: Place the label on the name of the
slot into which you have installed the Input Card.
– On the remote control: Place the label on the printing
of the corresponding input select buttons.
• Make sure the Input Card is correctly recognized by
"INPUT CONFIGURATION" ("INPUT C" – "INPUT F") on
the main menu of the monitor.
(continued)
Ex.: When installing only one Input Card
Insert
Panel
Slot cover (supplied)
1
2
, then
.
Slot cover (supplied)
or
Panel
On the rear panel
On the remote control
Guide
Guide
5
Advertisement
