Related Manuals for JVC Video Input Card IF-CF01PNG
Summary of Contents for JVC Video Input Card IF-CF01PNG
- Page 1 VIDEO INPUT CARD BEDIENUNGSANLEITUNG: MANUEL D’INSTRUCTIONS: ISTRUZIONI: MANUAL DE INSTRUCCIONES:TARJETA DE ENTRADA VIDEO COMPUESTO IF-CF01PNG VIDEO-EINGANGSKARTE CARTE D’ENTRÉE VIDÉO SCHEDA DI INGRESSO VIDEO МОДУЛЬ VIDEO ВХОДОВ INSTRUCTIONS LCT2108-001A...
-
Page 2: Video Input Card
VIDEO INPUT CARD IF-CF01PNG INSTRUCTIONS... - Page 3 Thank you for purchasing this JVC Input Card. In order to take full advantage of the card’s capabilities, please read and follow all instructions carefully before installing and using the card. Retain this booklet for future reference. Precautions Before installing this Input Card in your monitor, please read the Safety Precautions included in your monitor’s user manual.
- Page 4 (Business users) If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain information about the take-back of the product. [Other Countries outside the European Union] If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.
-
Page 5: Before Installation
Before Installation Accessaries • Label (x 1): For placing to the rear panel and the remote control of the monitor after installing the Input Card. • Slot cover (x 1): For covering the blank slot. Preparation • Wear gloves to protect your hands from metal parts on the Input Card’s board. •... - Page 6 Installation Insert the Input Card into the slot, fitting into the guides inside the slot, so that its panel touches the bottom of the monitor. You can install the Input Card(s) into either left or right slot. When installing, follow the procedure below. •...
-
Page 7: Controls And Features
Controls and Features Front view Label Rear view... - Page 8 1 Audio signal input terminals Accepts analog audio signals. Connect only the L/MONO terminal for monaural sound. 2 Composite signal input/output terminals Accepts composite signals. See page 8 for the signal formats compatible with this input card. Select input by using the button on the monitor. Input select: INPUT C (SLOT-1)/E (SLOT-2) NTSC and PAL are switched by setting “COLOR SYSTEM”...
-
Page 9: Specifications
Specifications Model name: Type: Target monitors: Inputs/Outputs: Compliant signal format: NTSC, PAL, SECAM, PAL60, NTSC4.43, PAL M, PAL N, Required slots: Weight: Dimensions (W x H x D): 133 mm x 34.5 mm x 185 mm Dimensions Unit: mm (inch) Front View (Terminal Side) 133 (5 1/4) IF-CF01PNG... - Page 10 © 2006 Victor Company of Japan, Limited 0306MKH-MW-VP...