Table of Contents
Advertisement
Appendix A: Technical Information
Keyboard/Mouse:
Memory Capacity: Three 3.3V unbuffered 64-bit DIMM sockets
Hardware
Management:
I/O Ports:
Floppy Port:
PCI IDE Ports:
Wake On LAN:
62
Micronics C400 System Board Manual
PS/2 style keyboard and mouse connector
Maximum memory - 768MB for SDRAM
(PC-100MHz SDRAM memory supported)
Supports EDO and SDRAM
ECC supported via chipset when using parity
Microprocessor System Hardware Monitor
CPU Fan Speed Monitoring (3-pin header)
Chassis Fan Speed Monitoring (3-pin header)
Two high speed serial ports (16550 compatible)
One 25-pin Parallel Port (ECP and EPP)
IrDA compliant IR header
Two USB connectors
SB-LINK header to support legacy Sound Blaster
compatible PCI audio card.
Supports 360K - 2.88MB formats
Auto detection of add-in floppy controllers
Ultra DMA/33 IDE
Two 40-pin IDE connectors
(Primary and Secondary IDE).
Multiple sector transfer support
Auto detection of add-in IDE board
Supports all ATAPI devices
Wake On LAN ready for remote monitoring
(3-pin header). NOTE: You must use a Wake On
LAN supported Ethernet adapter and an ATX power
supply that can handle the power requirement for 5V
standby.
Advertisement
Table of Contents
