Chapter 4: The BIOS Setup Utility
HDD Low Level Format
Diamond recommends that only trained technicians use this
utility. This selection allows you to perform a low level
format of your hard disk drive. To select the HDD LOW
LEVEL FORMAT option, highlight this option on the main
menu screen and press <ENTER>.
Figure 4:10: HDD Low Level Format Screen
The selections available are: Low Level Format Utility,
Select Drive Bad Track List and Preformat.
WARNING: This utility should not be run on an IDE or EIDE
hard drive unless the manufacturer of the hard drive instructs
you to do so.
55
Micronics C400 System Board Manual