Teac HD-B500 Owner's Manual page 33

Confirm your selection by pressing the OK or LEFT buttons. Cancel your selection by
pressing the EXIT button. Default setting is PAL
Audio mode: This allows selecting mono or stereo audio output from the Receiver to
your TV set. From the TV setting sub-menu, highlight Audio mode with the UP/DOWN
buttons and press the RIGHT button. Select the desired audio mode (Mono Left, Mono
Right or Stereo) with the UP/DOWN buttons. Confirm your selection by pressing the OK
or LEFT buttons. Cancel your selection by pressing the EXIT button. Default setting is
STEREO.
Digital Audio: This allows setting the HDMI, Coaxial and Optical digital audio output by
PCM or AC3 format.
If you selected 'AC3' output, all digital output switches to AC3 includes HDMI. Unless
your TV set or A/V amplifier is supporting HDMI output with AC3, otherwise it causes no
sound.
Default volume: This allows setting the audio output volume when the Receiver is
switched on. From the TV Setting sub-menu, highlight Default volume with the
UP/DOWN buttons and press the RIGHT button. Select the desired default volume with
the UP/DOWN buttons. The default audio volume is indicated by the bar-graph. Confirm
your selection by pressing the OK or LEFT buttons. Cancel your selection by pressing the
EXIT button.
33