Teac HD-B500 Owner's Manual page 25

TV channels: This feature allows the user to activate or deactivate TV channels. Select
TV channels and press the RIGHT button on the remote control unit. Use the UP/DOWN
buttons or PGUP/PGDW buttons to select the desired channel (displayed in red). Press
the OK button to activate or deactivate a channel. An activated channel is marked by a
red mark next to its name. Validate your selection by pressing the LEFT button.
Cancel your selection by pressing the EXIT button.
Radio channels: This feature allows the user to activate or deactivate radio channels.
It operates in the same manner as the TV channels activation/deactivation function
described in the previous paragraph.
Update mode: This feature allows the Receiver or the user decide what to do if new
channels are detected. Select Update mode and press the RIGHT button on the remote
control unit. Use the UP/DOWN buttons to select Automatic (the Receiver will
automatically adds new detected channels) or Manual (the user decides to add new
channels or not). Validate your selection by pressing the LEFT button. Cancel your
selection by pressing the EXIT button.
25