Radio Service Software Information; Configuring The Rib And Radio - Motorola GP350 Service Manual

146-174 mhz/438-470 mhz
Hide thumbs Also See for GP350:
Table of Contents

Advertisement

Foreword

Radio Service Software Information

Radio Service Software Information
To run the Radio Service Software, you will need the following equipment:
Required Equipment:
1.
IBM XT, AT, Convertible, or System/2 Model 30/50
and one Hard Disk.
TM
2. PCDOS
or MSDOS
3.
Radio Interface Box (RIB) HLN9214.
4.
RIB to IBM AT cable HKN9216.
5.
IBM AT cable to IBM XT computer adapter (optional) HLN9390.
6.
Programming/Test cable (HKN9857).
7.
Programming Hardware Kit (REX1143).
8.
RIB power supply HSN9412 (110 VAC) or 0180358A56 (220 VAC).
9.
Power Supply R1011A or equivalent.
RSS Manual
GP350 Radio
Configuring the RIB and Radio
1.
Connect the RIB to the computer (Figure 2).
2.
If your computer has an XT style communications port (25 pin connector), plug the HLN9390 adapter into the com-
puter and plug the HKN9216 cable into the adapter. If you are unsure of which connection is on the back of your
computer or the COM port, then please consult the computer manuals.
3.
Plug the large 25 pin end of the HKN programming cable into the RIB. The other end of this cable has a "battery
eliminator."
4.
Connect the two adapter plates (REX1143) to HKN9857 according to the instructions supplied with the Programming
Hardware Kit.
5.
Slide the battery eliminator in place of the radio's battery.
6.
Plug the HSN9412 power supply into a wall outlet, and connect the other end to the RIB.
7.
Connect the radio to a power supply and turn the volume control clockwise to turn it on.
xiv
TM
3.0 or later.
HVN9128
Software
Power Supply (7.2 VDC)
Note: Battery can be used on
programming cable making
power supply optional.
HKN9857
Programming / test cable.
Plugs between the RIB and radio.
Figure 2. Equipment Setup
TM
with 512K RAM, Dual Floppy Disk Drives or on Floppy Disk
HLN9214
(RIB)
6880904Z07-O
GP350 Portable Radios Service Manual
Computer
HKN9216
RIB to Computer Cable
Plugs into RIB and
computer.
HSN9412
RIB Power Supply.
Plug into 110 VAC
outlet
August, 1996

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents