JVC SR-VS20U Instructions Manual page 59

Mini dv/s-vhs video cassette recorder
Hide thumbs Also See for SR-VS20U:
Table of Contents

Advertisement

T
W
1
2
3
2
4
5
6
7
8
9
0
4
1
DV
S-VHS
PLAY
STOP
6
7
NOTES:
Once the Audio Dubbing starts, you can not use the other
deck.
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the Hi-Fi or mixed sound (Hi-Fi + Normal soundtracks),
refer to the "Select The Soundtrack" section (
select the soundtrack you wish to hear. (VHS deck only)
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the VCR enters the Play mode. Check the
counter reading before dubbing. (VHS deck only)
Audio dubbing is also possible using the rear AUDIO IN
connectors.
Audio dubbing cannot be performed on a VHS/S-VHS
cassette that has had its record safety tab removed, or on a
Mini DV cassette that has had its erase protection switch set
PAUSE
to "SAVE".
When playing back an audio-dubbed tape on the VHS deck,
refer to the "Select The Soundtrack" section (
select the soundtrack you wish to hear. When playing back an
audio-dubbed Mini DV tape on the DV deck, set "12BIT
MODE" to "SOUND2" (
Picture may be distorted during Audio Dubbing Pause.
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
Audio dubbing is not possible using the DV IN/OUT
connector.
START DUBBING
Engage the audio component's Play mode, then press
PLAY to start the tape in your VCR. Audio dubbing
begins at this point.
When monitoring the audio-dubbed sound on the DV
deck, set "12BIT MODE" to "SOUND2". (
blinks and
is displayed on the front display
panel.
To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
Press STOP to stop the tape in your VCR, and engage
the audio component's Stop mode.
pg. 33).
59
EN
pg. 33)
pg. 32) and
pg. 32) to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr-vs20ek

Table of Contents