Philips LC4.3E Service Manual page 11

4.3.7 Power Supply Panel (various models used)
X530
1
1
X520
Figure 4-10 Power supply panel
1. Disconnect all cables (1) from the panel.
Notice that the two connectors for X520 and X530 on
this panel are similar, and should not be mixed up later
when they are reconnected (X520 is connected via its
flatcable to connector CN01 on the LCD panel, near the R-
speaker; X530 is connected via its flatcable to connector
CN04 on the LCD panel, near the L-speaker).
2. Remove the three fixation screws (2) from the panel.
3. Take the panel out of its brackets.
Mechanical Instructions
2
1
2
1
2
F_15270_048.eps
180505
LC4.3E AA
4.3.8 Audio Amplifier Panel
2 1
Figure 4-11 Audio amplifier panel
1. Disconnect all cables (1) from the panel.
2. Remove the fixation screws (2) from the panel.
3. Remove the panel.
4. EN 11
2
F_15270_049.eps
180505