Accessing The Management Interface - SonicWALL TZ 150 Getting Started Manual

2. Connect the other end of the cable to the WAN port on the back
of your SonicWALL TZ 150.
The WAN LEDs on the front panel light up indicating an active
connection.
3. Connect one end of an Ethernet cable to the computer you are
using to manage the SonicWALL TZ 150.
4. Connect the other end of the cable to port # 1 on the back of your
SonicWALL TZ 150.
The port # 1 LEDs on the front panel light up indicating an active
connection.
4

Accessing the Management Interface

To access the Web-based management interface of the
SonicWALL TZ 150:
1. On the computer you have connected to port # 1, Start your Web
browser.
Alert: Turn off pop-up blocking software before accessing the
SonicWALL management interface.
Your Web browser must support Java and HTTP uploads.
Internet Explorer 5.0 or higher or Netscape Navigator 4.7 or
higher are recommended.
SonicWALL TZ 150 Getting Started Guide Page 5