Applying Power to the
2
SonicWALL TZ 150
1. Plug the power supply into the SonicWALL TZ 150 and into an
appropriate power outlet.
The Power LED
plug in the SonicWALL TZ 150. The Test LED
may blink while the appliance performs a series of diagnostic
tests. When the Test light is no longer lit, the SonicWALL TZ 150
is ready for configuration.
3
Connecting the SonicWALL TZ 150
Management
Station
Connecting the Ethernet Cables
1. Connect one end of an Ethernet cable to your Internet
connection, such as a DSL modem or cable modem.
This cable may already be connected between your computer
and your modem. If so, disconnect it from your computer, and
leave it connected to the internet.
Page 4
on the front panel lights up green when you
LAN 1
lights up and
WAN
DSL or Cable
Modem
Internet