Toyota 2001 HIGHLANDER Owner's Manual page 131

∗
DolbyR B NR
If you are listening to a tape that was
recorded with DolbyR B Noise Reduction,
push the button marked with the double–D
symbol. The double–D symbol will appear
on the display. Push the button again to
turn off DolbyR B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used for
recording the tape.
∗
: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. "DOLBY" and the
double D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
FM1·2
Push "FM1·2" to turn on the radio and
select the FM band. "FM1" or "FM2" will
appear on the display. This system allows
you to set twelve FM stations, two for
each button.
If the audio system is off, you can turn
on the radio by pushing "FM1·2". Also,
push "FM1·2" to switch from cassette or
compact disc operation to radio operation.
PWR·VOL (Power and Volume)
Push "PWR·VOL" to turn the audio system
on and off. Turn "PWR·VOL" to adjust the
volume.
'01 HIGHLANDER_U (L/O 0106)
RAND (Random): Compact Disc Player
There are two random features—you can
either listen to the tracks on all the com-
pact discs in the magazine in random or-
der, or only listen to the tracks on a
specific compact disc in random order.
To randomly play the tracks on a disc:
Quickly push and release
" " will appear on the display. The
disc you are listening to will play in ran-
dom order. If you hear a beep, you held
the button too long, and the player will
play all the tracks in the magazine in
random order. To turn off the random fea-
ture, push this button again.
Compact disc auto changer only—
To randomly play all the tracks in the
magazine:
Push and hold "RAND" until you hear a
beep. " " will appear on the dis-
play and the player will perform all the
tracks on all the discs in the magazine in
random order. To turn off the random fea-
ture, push this button again.
2001 MY HIGHLANDER_U (OM48432U)
RPT (Repeat)
Cassette Player
Push "RPT" while the track is playing.
" " will appear on the display. When
the track ends, it will automatically be
rewound and replayed. This process will
be continued until you push the button
"RAND".
again to turn off the repeat feature.
There must be at least 3 seconds of blank
space between tracks in order for the re-
peat feature to work correctly.
Compact Disc Player
There are two repeat features—You can
either replay a disc track or a whole com-
pact disc.
Repeating a track:
Quickly push and release "RPT" while the
track is playing. "
display. If you hear a beep, you held the
button too long, and the player will repeat
the whole disc. When the track ends, it
will automatically be replayed. This pro-
cess will be continued until you push the
button again to turn off the repeat feature.
" will appear on the
131