Operating Environment - Cisco Explorer 4250 User Manual

Home gateway
Hide thumbs Also See for Explorer 4250:
Table of Contents

Advertisement

IMPORTANT SAFETY
Prevent Power Cord Damage
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where the cord exits from the apparatus.
Provide Ventilation and Select a Location
• Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
• Do not place this apparatus on a bed, sofa, rug, or similar
surface.
• Do not place this apparatus on an unstable surface.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifi ers)
that produce heat.
• Do not install this apparatus in an enclosure, such as a
bookcase or rack, unless the installation provides proper
ventilation.
• Do not place entertainment devices (such as VCRs or
DVDs), lamps, books, vases with liquids, or other objects
on top of this product.

Operating Environment

This product is designed for operation indoors with a
temperature range from 32° to 104° F (0° to 40°C). Each
product should have adequate spacing on all sides so that
the cooling air vents on the chassis are not blocked.
Protect from Exposure to Moisture and
Foreign Objects
Do not use this apparatus near water.
WARNING: Avoid electric shock and fire
hazard! Do not expose this product to liquids, rain,
or moisture.
WARNING: Avoid electric shock and fire
hazard! Unplug this product before cleaning. Clean
only with a dry cloth. Do not use a liquid cleaner or
an aerosol cleaner. Do not use a magnetic/static
cleaning device (dust remover) to clean this
product.
INSTRUCTIONS,
Accessories Warning
Service Warnings
Servicing is required when the apparatus has been
damaged in any way, such as a power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Check Product Safety
Upon completion of any service or repairs to this product, the
service technician must perform safety checks to determine
that this product is in proper operating condition.
Protect the Product when Moving It
Always disconnect the power source when moving the
apparatus or connecting or disconnecting cables.
continued
WARNING: Avoid electric shock and fire
hazard! Never push objects through the openings in
this product. Foreign objects can cause electrical
shorts that can result in electric shock or fi re.
WARNING: Avoid electric shock and fire
hazard! Only use attachments/accessories specifi ed
by your service provider or the manufacturer.
WARNING: Avoid electric shock! Do not open
the cover of this product. Opening or removing the
cover may expose you to dangerous voltages. If
you open the cover, your warranty will be void. This
product contains no user-serviceable parts. Refer
all servicing to qualifi ed service personnel.
WARNING: Avoid personal injury and
damage to this product! Use only with
the cart, stand, tripod, bracket, or
table specifi ed by the manufacturer
or sold with the apparatus. When a
cart is used, use caution when moving
the cart / apparatus combination to
avoid injury from tip-over.
20070802 Set-Top Cable US & Canada
3

Advertisement

Table of Contents
loading

Table of Contents