Table of Contents
Advertisement
IV. BIOS SETUP
Advanced (sub-menu 3/4)
PCI Configuration
Slot X IRQ: [Auto]
Your motherboard may have between 2 and 5 PCI slots depending on the chipset. Each
PCI must have a unique IRQ number to operate. The configuration options are: [Auto]
[NA] [3] [4] [7] [9] [10] [11] [12] [14] [15]. Make sure you do not choose an IRQ
number used by another device.
PCI/VGA Palette Snoop: [Disabled]
Some display cards that are nonstandard VGA such as graphics accelerators or MPEG
Video Cards may not show colors properly. The setting Enabled should correct this
problem. Otherwise leave this on the setup default setting of Disabled. The configura-
tion options are: [Disabled] [Enabled].
PCI Latency Timer: [32]
(Leave on default setting for best performance vs. stability.)
Symbios SCSI BIOS: [Auto]
Auto allows the BIOS to detect whether you have a Symbios SCSI card, if detected the
onboard Symbios BIOS will be enabled, if not then it will be disabled. Disabled prevents
the onboard Symbios BIOS to be enabled so that the external Symbios SCSI card's own
BIOS can be used instead. Note: If your Symbios SCSI card does not have a BIOS, the
Symbios SCSI card will not function. The configuration options are: [Auto] [Disabled].
USB Function: [Disabled]
The USB ports can be activated or deactivated using this field. The configuration op-
tions are: [Disabled] [Enabled].
ASUS MES-VM User's Manual
47
Advertisement
Table of Contents
