Primary Master/Slave & Secondary Master/Slave - Asus mes-vm User Manual

Video: [EGA/VGA]
This field allows setting of display type. Use MONO for black and white monitors,
otherwise use the EGA/VGA setting. The configuration options are: [EGA/VGA]
[MONO].
Primary Master/Slave & Secondary Master/Slave
These fields are used to configure IDE devices. The arrow head icon indicates that this
field contains a sub-menu. Move the cursor to highlight the field representing the ap-
propriate channel you wish to setup and press the Enter key to enter the sub-menu.
NOTE!
Before attempting to configure a hard disk drive, make sure you have the
configuration information supplied by the manufacturer of the drive. Incorrect
settings may cause your system to not recognize the installed hard disk. To allow
the BIOS to detect the drive type automatically, select [AUTO].
Type: [Auto]
Select Auto to automatically detect an IDE hard disk drive. If automatic detection is
successful, the correct values will be filled in for the remaining fields on this sub-
menu. If automatic detection fails, you hard disk drive may be too old or too new. You
can try updating your BIOS or enter the IDE hard disk drive parameters manually.
Other options are:
IV. BIOS SETUP
ASUS MES-VM User's Manual 37