Sony Bravia KLV-48R472B Operating Instruction page 18

USB Auto Start
When USB device is connected to the USB
port, select [On] to automatically view the
thumbnail of the last played Photo/
Music/Video.
Clock/Timers
Sets the timer and clock.
Sleep Timer: Set the time in minutes
that you would like the TV to remain
on before shutting off automatically.
On Timer: Turns on the TV from
standby mode at a time you set, and
tuned to a channel or input of your
preference. Before setting this
function, make sure you set the
correct current time.
Clock Set: Set the current time and
date. This feature also can be set
from initial set-up.
Auto Start-up
Starts the initial set-up procedure. This
option allows you to retune the TV after
moving houses, or to search for new
channels that have been launched by
broadcasters.
Language
Select the language in which the menus
are displayed.
Start-up Logo
Select [On] to display the logo when the
TV is turned on. Select [Off] to disable it.
LED Indicator
Select [On] to light up the LED indicator.
Select [Off] to disable it.
AV Set-up
Video Labels: Assigns name to external
equipment input.
Enable: Select [Auto] to display names
only when the equipment is connected,
or [Always] to display regardless of
connection status.
Label Inputs: Uses one of the preset
labels to assign a name to connected
equipment. Select [Edit] to creates your
own label.
18
GB
Colour System: Selects the colour
system [Auto], [PAL], [SECAM],
[NTSC3.58], [NTSC4.43] or [PAL60]
according to the composite video
signal from the input source.
Video/Component Input: Select [Auto]
to have the TV detect and switch
between the component video jack
or the video jack
component video jack
jack is connected.
Note
• You cannot use the component video jack
and the video jack at the same time.
Speakers: Select sound output from
the TV speakers or external audio
equipment.
Headphone/Audio Out: Sets the sound
output to headphones, external
audio systems or Active Subwoofer
connected to the TV. Disconnect
headphones from the TV when you
select [Audio Out] or [Subwoofer].
Headphone Speaker Link: Switches the
TV's internal speakers on/off when
you connect headphones to the TV.
Headphone Volume: Adjusts the
volume of the headphones.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio
Out].
Audio Out:
When using an external
Variable:
audio system, volume output from
audio out can be controlled using the
TV's remote control.
The audio output of the TV is
Fixed:
fixed. Use your audio receiver's
volume control to adjust the volume
(and other audio settings) through
your audio system.
Digital Audio Out: Sets the audio signal
that is output by connecting using
HDMI (ARC) cable. Set to [Auto],
when connecting equipment
compatible with Dolby Digital or DTS.
Set to [PCM], when connecting
equipment not compatible with
Dolby Digital or DTS.
when
or video