Table of Contents
Advertisement
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified
person, such as your dealer, for service.
Symptom
No sound is heard.
Unable to record on an MD.
Unable to operate the remote control.
Loaded MD cannot be ejected.
Operations are disabled.
Specifications
MD recorder
Audio Playing System: MiniDisc digital audio system
Recording System:
Magneto-optical overwrite
system
Reading System:
Non-contact, semiconductor laser
pickup ( =780 nm)
Error Correction System:
CIRC (Cross Interleave Reed-
Solomon Code)
Sampling Frequency:
44.1 kHz (With sampling rate
converter for recording — 32 kHz
/44.1 kHz/48 kHz)
Audio Compression System:
ATRAC (Adaptive TRansform
Acoustic Coding)
Wow and Flutter:
Immeasurable
Dimensions (approx.): 181 mm x 81 mm x 310 mm
(W/H/D)
(7
Mass (approx.):
1.7 kg (3.5 lbs)
Possible Cause
•
Connections are incorrect, or
loose.
•
You are using a prerecorded MD.
•
The MD is write-protected.
•
The path between the remote
control and the remote sensor on
the unit is blocked.
•
The batteries have lost their
charge.
•
The main AC power cord is not
plugged in.
•
The built-in microprocessor has
malfunctioned due to external
electrical interference.
3
/
in. x 3
1
/
in. x 12
1
/
in.)
16
4
4
•
Check all connections and make
corrections (see pages 5 – 6).
•
Change it with a recordable MD.
•
Unprotect the MD (see page 11).
•
Remove the obstruction.
•
Replace the batteries.
•
Plug in the AC power plug.
•
Unplug the unit then plug it back
in.
Supplied Accessories
See page 5.
Design and specifications are subject to change without
notice.
US and foreign patents licensed from Dolby
Laboratories Licensing Corporation.
Action
32
Advertisement
Table of Contents
