Connecting Another Digital Audio Equipment - JVC 0200JTMMDWJSCEN Instructions Manual

Connecting Another Digital Audio Equipment

For digital audio recording onto an MD, XM-G6 unit
connected to FS-G6 system has one more optical digital
terminal (OPTICAL DIGITAL IN for AUX), prepared for
an external digital audio output equipment.
When connecting another digital equipment
Make sure to turn off FS-G6 system with XM-G6
unit and unplug the AC power cord. Leave it until all
the connection completes.
XT-UXG6
XM-G6
Before connecting the other equipment,
remove the protective plug from the terminal.
DO NOT place an external equipment onto (or
under) FS-G6 system and XM-G6 unit.
Damage or malfunction may result from heat
generating portion of units.
1
Turn off FS-G6 system and unplug the AC power
cord from the wall outlet.
2
Using the Optical digital cable (not supplied), connect
between XT-UXG6 unit and another digital
equipment.
Now you have finished installation to FS-G6 system.
DIGITAL OUT
for XM-G6
DIGITAL IN
for XT-UXG6
DIGITAL IN
for AUX
Protective Plug
6