Introduction; How This Guide Is Organized - HELIX Broadcaster 100 User Manual

INTRODUCTION

Welcome to Helix Broadcaster 100. This guide explains how to install and run
Helix Broadcaster with the embedded Helix Server. It shows you how to configure
inputs from the capture card or a network source and create encoded output
streams using the Helix Broadcaster 100 touch screen interface.

How this Guide Is Organized

Chapter 1: System Setup
You set up Helix Broadcaster by assigning it an IP address as described in this chapter, which
also explains how to access the browser interface.
Chapter 2: Inputs
This chapter walks you through the process of receiving input from a device such as a camera
or another server.
Chapter 3: Outputs
Using any input, you can create up to three outputs that you pass to Helix Server for client
streaming or forward to another server or encoder.
Chapter 4: Video and Audio Options
This chapter describes the audio and video encoding options that you define for any output.
Appendix A: Console Setup
This appendix explains how to use the console menu to set up the Helix Broadcaster IP
addresses along with other network settings.
1