Helix Broadcaster 100 Touch Screen User Guide
Shell Menu Options
4. Choose from these options:
Browser Interface
Once Helix Broadcaster is connected to your network, you display the browser interface from
any machine on your network. Use the secure HTTP protocol (HTTPS) to access the Helix
Broadcaster IP address. For example:
https://98.111.12.114
You will be prompted to enter the administrator name and password. The defaults are:
user name admin
password admin
Once you log in, you can access Helix Broadcaster functions that are organized in tabs that
appear at the top of the page.
Tabbed Functional Areas
— Resets Helix Broadcaster to its factory defaults, erasing stream
Restore Defaults
•
confirmation information and returning the unit to its default IP address.
You can save the configuration to file and later restore it. Using the
Tip:
browser interface, navigate to
— Suspends the firewall settings that have been set up using the browser
Clear Firewall
•
interface's
Network Setup
— Returns the log-in password to the default value of
Reset Password
•
— Displays an interactive series of prompts that allow you to
Calibrate Touchscreen
•
recalibrate the touch screen interface.
System Setup > Firmware Setup > Config Backup
category under the
System Setup
CHAPTER 1: System Setup
.
tab.
.
admin
7