Spray Arms 8 - Kenwood KDW8ST2A User Manual

• Carefully lift the main filter out.
(Fig )
• Carefully lift the fine filter out with
care. (Fig 3)
• Rinse all the filters under running
water, then refit all filters in the fol-
lowing order.
• Carefully refit the fine filter with
care. (Fig 3)
• Carefully refit the main filter. ( Fig
)
• Gently unscrew the course filter
in a clockwise direction. (Fig 1 on
Page 7)
NOTE: Do not over tighten the filters.
Put the filters back in the filter cylinder
in sequence securely. Otherwise the
residue could get into the system and
cause a blockage.
WARNING!
NEVER use the dishwasher without fil-
ters in place. Improper replacement of
the filter may reduce the performance
levels of the appliance and damage
dishes and utensils.
spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked and
cleaned regularly. (Fig 1)
• Use a pointed object, eg. a cocktail
stick, to loosen food particles in
the spray arms' jets.
NOTE: Do not attempt to remove the spray arms.
GB-8
Kenwood KDW8ST2A_IB_GB_Final_09028 28
Filter cylinder without the filters

3
4
1
28/08/09 12:31:17 PM