Table of Contents
Advertisement
2.
Installation
2.1
Installing Marble Accents
Marble is a natural product, and, therefore, each piece will have its own unique character. Marble can be scratched so care
should be taken to avoid putting heavy or rough objects (trivet/steamers) on the surface. If the marble should become
scratched, the scratch may be removed or diminished by polishing it with jeweler's rouge (which can be purchased at many
hardware stores). Do not install the marble before curing the paint.
The marble set consists of 2 pieces. A large piece which fits onto the stove top and a smaller piece which fits onto the ash
lip which is located below the fuel door.
Install the marble gasket and marble as follows:
1. Install gasket on stove top as shown in the illustration. The ceramic fiber blanket and strips (cerawool) which come
with each unit must be placed under the marble to insulate it from high temperatures
on top of the firebox. Do not place the marble directly on the top metal surface of the stove or it will crack.
2.
Place top marble piece onto the gasket on stove top
3. Place ash lip marble into recessed area on the stove ash lip (located below the fuel door).
2.2
Baffle Bricks
The baffle bricks are preinstalled by manufacturer.
IMPORTANT: The baffle bricks require periodic inspection and replacement for proper operation. If
the baffle bricks are fractured or crumbling, they should be replaced. Do not operate this appliance
without the baffle bricks properly installed.
Advertisement
Table of Contents
