Sony Bravia KD-65X9005B Manual page 92

PC
Making a Connection
Connect your PC with an HDMI cable to enjoy music, pictures and other content stored in it.
* Be sure to use an authorised HIGH SPEED HDMI cable bearing the HDMI logo.
Corresponding PC input signal
(Resolution, Horizontal frequency/Vertical frequency)
640 x 480, 31.5 kHz/60 Hz
800 x 600, 37.9 kHz/60 Hz
1024 x 768, 48.4 kHz/60 Hz
1280 x 768, 47.4 kHz/60 Hz and 47.8 kHz/60 Hz
1360 x 768, 47.7 kHz/60 Hz
1280 x 1024, 64.0 kHz/60 Hz
1920 x 1080, 67.5 kHz/60 Hz*
3840 x 2160, 30 Hz
* The 1080p timing, when applied to the HDMI input, will be treated as a video timing and not a PC
timing. This will affect the [System Settings] and [Display] settings. To view PC content, set
[Scene Select] to [Graphics], [Screen Format]/[Wide Mode] to [Full], and [Display Area] to [+1].
([Display Area] is configurable only when [Auto Display Area] is set to [Off].)
Notes
This TV does not support interlaced signals.
For optimum picture quality, it is recommended that you use the signals in the chart. In plug and
play, signals with a 60 Hz vertical frequency will be detected automatically. (PC reboot may be
necessary.)
Depending on the connection status, the image may be blurred or smeared. In this case,
change the PC's settings, then select another input signal in "Corresponding PC input signal".
1920 pixel x 1080 line/60Hz output may not be available, depending on your PC. Even if 1920
pixel x 1080 line/60Hz output is selected, the actual output signal may differ. In this case,
change the PC's settings, then select another input signal in "Corresponding PC input signal".
© 2014 Sony Corporation
Top Page > Table of Contents > Using Other Devices > PC
List of Contents